Eiki HDT700, Owner'S Manual

Page: 38 / 62

38
Chapter 4 Controlling the Projector
Item Description
Contrast .............................. Adjusts picture con-
trast. (0~ 63)
Brightness
......................... Adjusts picture bright-
ness. (0~ 63)
Color ...................................... Adjusts picture color
saturation. (0~ 63)
Tint ......................................... Adjusts picture hue.
(0~ 63)
Color temp. ....................... Sets a color temperature
mode. (X Low, Low, Mid,
High, Adj.)
White balance
Red, Green, Blue
..... Adjusts each white
balance respectively.
(0~ 63)
* When changing the value of the
white balance, the color temp.
indicates "Adj."
Offset
Red, Green, Blue
..... Adjusts each offset
respectively. (0~ 63)
Auto picture control
....... Sets auto picture con-
trol level. (OFF, L1, L2)
Advanced color ............. Applies improved
color adjustment with
yellow light controller.
(Auto, OFF)
Sharpness .......................... Adjusts picture sharpness. (0~ 31)
Gamma .................................. Adjusts brightness of darker part of the picture. (0~ 15)
Noise reduction .............. Switches noise reduction mode (ON, OFF)
Progressive ................................Switches progressive mode (OFF, ON, Film)
Reset ...................................... Resets the Image adjustment to previous levels.
Store
...................................... Stores the Image adjustment values. Select an item [Image1 - Image10] from
the pull-down menu and click
Store
button.
Load image mode ....... Loads the Image mode. Select an image mode from the pull-down menu and
click
Load
button. There may not be available mode depending on the input
mode as shown in the table left.
Image adjustment
This function is to adjust the projected picture image and save the image mode. To store
the adjusted value, click
Store
button, and to load the adjusted value, click
Load
button.
Input source
Image mode Video Computer
Dynamic
4 4
Standard
4 4
Natural
4
*
Cinema
4
*
Real *
4
Image1 - 10
4 4
✐
The mark "
4
" means that the available image mode in the
selected input source. The error message appears when
selecting the disabled image mode indicated with "*".