- 16
-
Timer Programming
This Feature allows you to select a timer that will shut off the devices that are
contacted to the EZtrol for the time you select.
1. Select Timer
2. Select Setup
3. Type in how many hour(s) you need
4. Select OK
5. In this example using a four hour timer the devices that are connected to
the EZtrol 200L will shut down after four hours. The LEDs on the bottom of
the EZtrol 200L are indicators to let you know how much time you have
left before the devices shut down in this example the first LED will shut off
after 1 hour then there will be three remaining lit LEDs which indicate that
you have three hours left, after two hours only two LEDs will remain lit
after three hours only one will remain lit then leaving one hour left before
the devices will shut down. Any time during this process you may select
the ON button to reset the timer and all four LEDs will light up again.
