- 8
-
Reset Button
Reset Button
5. Select open
Note: once file is opened it may be modified for current user specs
6. Select the Upload New Configuration to Control Button
Or
7. The software will prompt you to press the reset button. (reset button is
located on the back of the EZtrol 200L)
8. After the programming status disappears disconnect the cables from the
Computer and press the reset button on the back of the EZtrol 200L and
you are ready for the physical installation of the EZtrol 200L
Standard Programming
1. Select EZtrol 200 under LSE Controls by clicking on the start menu, then
all programs, then LSE Controls and select EZtrol 200
2. Select Projector (from the top of the EZtrol 200 software)
3. Select Model
4. Select Control Port 1
