Usage Notice
6
Caution:
• Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
•
Do not put any flammable objects, or spray can
near the projector. Hot air is exhausted from the
air vents.
• Keep the exhaust vent at least 1m away from any
objects.
• Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
• Do not put anything on the projector. Objects put
on the cabinet will not only get damaged but also
may cause fire hazard by heat.
• Cooling fans are provided to cool down the
projector.
• The fan’s running speed is changed according to
the temperature inside the projector.
Caution in ceiling installation the
projector
•
Only qualified personal is authorized for ceiling
installation.
• We are not responsible for the hurt and damage
caused by ceiling brakect that purchased from
unauthorized dealer even in warranty period.
• Remove the ceiling bracket immediately while not
use.
• While installing, torque screwdriver is suggested,
don’t use electric or impact-type screwdriver.
• Please read the manual of bracket for details.
•
Please read the Owner’s Manual, and confirm
screw size and location of screw holes on the
projector
• The bracket is subject to change without notice.
Caution in moving or transporting the
projector
• Do not drop or bump the projector, otherwise
damages or malfunctions may result.
• When carrying the projector, use a suitable
carrying case.
• Do not transport the projector by courier or any
other transport service in an unsuitable transport
case. This may cause damage to the projector.
Information for users in the European Union
This is a device to project images onto a screen,
etc., and is not intended for use as indoor lighting in
a domestic environment. Directive 2009/125/EC.
Warning:
Do not aim a laser pointer at the lens apearture,
which may damage the DMD in the projector and
cause personal injury.
We are not responsible for the hurt and damage
caused by the improper use of laser pointer even in
warranty periond.
Vents in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect
it from overheating, these openings must not be
blocked or covered.
When moving the projector, take care of the lens and
retract the adjustable foot to prevent damage to the
lens and cabinet.
Safety Labels of This machine
Laser Notice
<For USA and Canada>
This Product is classified as Class 3R of IEC60825-
1:2007 and also complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser Notice
No.50, dated June 24, 2007.
Usage Notice
<For EU countries, Japan, and China>
IEC 60825-1:2014: CLASS 1 LASER PRODUCT -
RISK GROUP 2
Wavelength:
449-461 nm
Pulse duration:
1.66 ms
Max. output:
98 mW
Laser emission
port
Air circulation
Moving the projector
For information about transporting the projector
by courier or any other transport service, consult
your dealer.
• Do not put the projector in a case before it is
cooled enough.
•
Upon completion of any service or repairs to this
projector, ask the service technician to perform
routine safety checks to determine that the projector
is in safe operating condition.
Summary of Contents for EK-830U
Page 2: ......