Eiki EK-830U, Owner'S Manual, Page: 42 / 78

User Settings
42
User Settings
Using the On Screen Display (OSD)
The Projector has a multilingual On Screen Display that allows you to
make image adjustments and change a variety of settings.
How to Operate
1. To open the OSD, press “Menu” on the Control Panel or Remote
Control.
2. When OSD is displayed, use keys to select any item in
the main menu. While making a selection on a particular page,
press “Enter” key to enter sub menu.
3. Use keys to select the desired item in the sub menu and
press “Enter” key to view further settings. Adjust the settings by
using
key or key.
4. Select the next item to be adjusted in the sub menu and adjust
as described above.
5. Press “Exit”, and the screen will return to the previous menu.
6. Press “Menu” or
key to return to the main menu.
7. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings .
Main Menu
Sub Menu
Setting
Image Adjustment
Picture Mode
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color Temperature
HSG
Wall Color Mode
Select
Enter
Exit
Standard
Standard(2.2)
White
Note
• If no button
operation is made
for approximately
10 seconds, the
OSD will be closed
automatically.