Eiki EK-830 Series, Owner'S Manual, Page: 52 / 78

User Settings
52
Network
Configure the network settings.
`
Status: Display the network connection status.
`
DHCP: Select On to allow the projector to obtain an IP address
automatically from your network. Select “Off” to manually assign
IP, Subnet Mask and Gateway configuration.
`
IP Address: Set an IP address or display IP address provided
from DHCP server when DHCP is set to “On”.
`
Subnet Mask: Set subnet mask number or display subnet mask
number provided from DHCP server when DHCP is set to “On”.
`
Apply: Select “Yes” to apply the changes made in network
configuration settings.
`
MAC Address: Display MAC address.
Security
Configure the security settings.
`
Password Protection: Select “On” to use the security verification
when the turning on the projector. Select “Off” to be able to
switch on the projector without password verification.
`
Change Password: Set the password.
`
Lock to User Startup Screen: Use this function to lock
the Startup Screen and it cannot be changed by the
“Start-up Screen“ or “Screen Capture“ function.
Reset
Return the adjustments and settings to the factory default values.
Choose “Yes” to return the display parameters on all menus except
Language to the factory default settings.
Note
•
The default
security
code is
“12345678”.