Eiki EK-830 Series, Owner'S Manual, Page: 51 / 78

User Settings
51
enter the sub menu and select which sources you require. Press
“Enter” to finalize the selection. The projector will only search for
inputs that are enabled.
Power Settings
`
Direct Power On: Choose “On“ to activate this function.
The projector will automatically power on when AC power is
supplied, without pressing the button.
`
Start on Input Detection: Choose “On“ to activate this function.
The projector will automatically power on when a VGA signal is
detected, without pressing the button.
`
Power Off Notice: When “On” is selected, a power off message
will be displayed after pressing the button. When “Off” is
selected, the projector turns off after pressing the button
one time.
`
Date & Time: Set the date and time for this projector.
`
Auto Power Off (Min): Sets the countdown timer interval. The
countdown timer will start, when there is no signal being sent to
the projector. The projector will automatically power off when the
countdown has finished (in minutes). When countdown timer is
selected to “0”, auto power off is disabled.
`
Customer Power Off (Hours): Schedule automatic shutdown of
the projector.
Standby Settings
`
Monitor Out
Enable/Disable the Monitor output function.
–
On: Enable the Monitor Out function at projector standby
status.
– Off: Disable the Monitor Out function at projector standby
status.
`
Network
Enable/Disable the network function.
–
On: Enable the network function at projector standby status.
– Off: Disable the network function at projector standby status.
`
DC 5V Out
Use this function to enable DC 5V power output through the
USB-A terminal.
`
HDBaseT IR Carrier
Use this function to enable HDBaseT IR Carrier.
Note
•
Default value of
“Auto Power Off (Min)”
is 20 min.