Eiki EK-510U, Owner'S Manual

Page: 35 / 89

35
Input selection
Direct Operation
Press HDMI, VGA, VIDEO, HDBase T,
COMPONENT, RGBHV or S-VIDEO on the
remote control as input source.
When input source is from computer
connected to VGA terminal with VGA
cable, please select "VGA".

Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, the input signal will
be searched automatically.
Menu operation
1 Press INPUT button on the remote control or
control panel to display the input select menu.
2 Press

button to select VGA, RGBHV,
HDMI 1, HDMI 2(MHL), HDBaseT,
Component, Video, S-video, Memory Viewer,
Network or USB Display, then press the OK
button.
Input select menu
Remote control
When input source is from equip-
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 1".
When input source is from computer
equipment connected to BNC termi-
nal with BNC*5 cable, please select
RGBHV..
When input source is from equip-
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 2".
When input source is from equip-
ment connected to HDBaseT termi-
nal with RJ45 cable, please select
"HDBaseT".
*This function is not available for EK-512X
HDMI 1
RGBHV
HDMI 2(MHL)
HDBase T
Component
Select it when the input source is
from the video equipment connected
to YPbPr terminal.
Select it when the video input signal
is connected to VIDEO IN terminal.
VGA
Video
Input select
Control Panel
INPUT
360.2
141.7
VOL- VOL+
AUDIO AUDIO
IN2
AUDIO
IN1
AUDIO
OUT
S-VIDEO VIDEO R/C
IN
R/C
OUT
RS-232C
DVI-D
P/PR
MONITOR OUT
VGA
IN
G/Y B/PB H/HV V
S-VIDEO
RGBHV HDBase T
COMPONENT
VIDEO HDMI
VGA
PATTERN
INPUT
VGA
RGBHV
HDMI 1
HDMI 2(MHL)
HDBase T
Component
Video
S-video
Memory Viewer
Network
USB Display