43
Setting
The projector comes with convenient adjustment function.
1 Press the MENU button on remote controller and the OSD displays. Press
button to select
Setting icon, press
button or OK button to confirm the selection.
2 Press
button to point to required item and press OK button to confirm the selection.
On start
Setting the projector to be turned on automatically
just by connecting the AC power cord.
On .......... Start the projection with countdown
immediately.
Off .......... Start up in the standby mode.
Standby mode
Press
button to select the item :
LAN RS232C Keypad IR Control
ECO
х
∆
∆
∆
Normal
√
√
∆
∆
Network
*х
∆
∆
∆
х: No Control ∆: Power On command Only
√: All commands are active
*X: Power On command is active with “Wake On LAN” software.
Note:
●
The “Wake On LAN” software and its manual can be downloaded from EIKI global website
https://global.eiki.com. File Name : Software_WakeOnLAN
High land
Control the fan speed through the Setting menu.
Off ...... Normal speed. Set it so if the projector is operated at normal altitude.
On ...... Faster speed than the setting as "Off". Set it so if the projector is operated at high altitude.
Note:
●
Please change the setting as "ON", while operating the projector at an altitude around 1400 ~
2700m.
Light source control
Change the brightness of the projection.
Normal .... Normal brightness.
Eco .......... Lower brightness, reducing power consumption and extending the life time of the
light source.
OSD setting-Setting
Cooling fast
provides the following options in the cooling fans'
operation after turning off the projector.
Normal ..............With 60 sec. cooling time.
30 sec .............. Faster cooling time and louder
noise of fan.
0 sec.(Default) ... Allow to unplug the AC power
cord immidiately without the
cooling.
Closed caption (Video signal only)
Allows the subtitle to be displayed for the audio
contents or other information. If the input source
contains closed caption, you can enable this
function and change the channel. Press
to
select Off, CC1, CC2, CC3 or CC4.
Setting
On start
Standby mode
High land
Light Sourcecontrol
Cooling fast
Closed caption
Key lock
Contrast optimization
Remote control
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Setting
On start
Standby mode
High land
Light source control
Cooling fast
Closed caption
Key lock
Contrast optimization
Remote control
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Note:
●
Closed caption is disable when screen menu
or Timer displayed on screen.
Summary of Contents for EK-355UK
