16
Terminal
①
VIDEO IN
Connect video output signal to this terminal.
②
Micro-USB
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
③
VGA IN 1
Connect output signal from computer to this
terminal.
④
VGA OUT
Transmit signals from
③ or ⑤
to other displays
when the projector is acting as a output display.
⑤
VGA IN 2 / YPbPr / S-VIDEO
Connect output signal from computer, YPbPr or
S-Video to this terminal.
⑥
HDMI 1
Connect HDMI digital output signals to this
terminal.
⑦
HDMI 2(MHL)
Connect HDMI digital output signals or MHL
digital output signals to this terminal.
⑧
USB
When using the Memory Viewer function, insert
the USB Flash Drive to this terminal directly.
⑨
LAN
Connect network cable to this port for controlling
and operating the projector via network.
⑩
AUDIO (L/R)
Connect audio signals to this terminal.
⑪
Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
* Kensington is a registered trademark of ACCO
Brands Corporation
⑫
RS232C
Connect serial cable to this terminal when using
RS232 device to control or operate the projector.
⑬
Power cord connector
⑭
AUDIO IN
Connect audio signals
⑮
AUDIO OUT
Output audio signals to amplifier or other audio
equipment.
⑯
Speaker
Name and function of the projector
①
⑪
⑫
⑬
⑭
⑮
⑯
②
③
④
⑤
⑥ ⑦
⑧
⑨
⑩
Summary of Contents for EK-355UK
