
Air circulation
Vents in the cabinet are provided for ventilation.
To ensure reliable operation of the product and
to protect it from overheating, these openings
must not be blocked or covered.
Caution
Hot air is exhausted from the exhaust vent.
When using or installing the projector, the
following precautions should be taken.
- Do not put any flammable objects, or spray
can near the projector. Hot air is exhausted
from the air vents.
- Keep the exhaust vent at least 1m away from
any objects.
- Do not touch a peripheral part of the exhaust
vent, especially screws and metallic part. This
area will become hot while the projector is
being used.
- Do not put anything on the projector. Objects
put on the cabinet will not only get damaged
but also may cause fire hazard by heat
- Cooling fans are provided to cool down the
projector.
- The fan
’s running speed is changed according
to the temperature inside the projector.
Installing the projector properly
Please set the projector on nearly-level. Be
sure to install the projector properly. Improper
installation may reduce the lamp lifetime and
even cause a fire hazard
Caut ion in c eilin g ins t allat io n t he
projector
– Only qualified personal is authorized for
ceilin installation.
– We are not responsible for the hurt and
damage caused by ceiling bracket that
purchased from unauthorized dealer even in
warranty period.
– Remove the ceiling bracket immediately
while not use.
– While installing, torque screwdriver is
suggested, don't use electric or impact-
type screwdriver.
– Please read the manual of bracket for details.
Do not roll the projector over
10 from side to side.
o
Do not point the projector up
to project an image.
Do not point the projector
down to project an image.
Do not put the projector on
either side to project an image.
(
Do not pitch the projector more
than 10 backward and
forward.
o
Moving the projector
When moving the projector, take care of the
lens and retract the adjustable feet to
prevent damage to the lens and cabinet.
Caution in moving or transporting
the projector
– Do not drop or bump the projector,
otherwise damages or malfunctions may
result.
– When carrying the projector, use a
suitable carrying case.
– Do not transport the projector by courier or
any other transport service in an unsuitable
transport case. This may cause damage
to the projector. For more information about
transporting the projector by courier or any
other transport service, consult your dealer.
– Do not put the projector in a case before it is
cooled enough.
Safety Instructions
5