65
Note
•
Before setting “TCP/IP”, select “OFF” for “DHCP
Client”.
•
Confirm the existing network’s segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If “192.168.150.002”
is not used in a network with an IP address of
“192.168.150.XXX”, you don’t have to change
the projector IP address.
•
For details about each setting, consult your net-
work administrator.
t
t
t
t
t
Setting the TCP/IP
Set the TCP/IP manually.
1
Select “TCP/IP”, then press
ENTER
.
2
Enter “IP Address” using
'
'
'
'
'
,
"
"
"
"
"
,
|
|
|
|
|
and
\
, then press
ENTER
.
3
Enter “Subnet Mask” using
'
'
'
'
'
,
"
"
"
"
"
,
|
|
|
|
|
and
\
, then press
ENTER
.
4
Enter “Gateway” using
'
'
'
'
'
,
"
"
"
"
"
,
|
|
|
|
|
and
\
, then press
ENTER
.
Description
Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Factory default setting:
255.255.255.000
Set the subnet mask to the same as that
of the computer and equipment on the
network.
Factory default setting:
000. 000. 000. 000
* When not in use, set to:
“000. 000. 000. 000”.
Selectable items
IP Address
Subnet Mask
Gateway
y
y
y
y
y
Service Mode
Only the service centers use the menu. Do not
use the menu.
u
u
u
u
u
Returning to the Default
Settings
This function allows you to initialize the settings
you have made in the projector.
Note
About the network settings
•
“IP Address”, “Subnet Mask”, “Gateway” and
other network setting items are initialized.
The following items or menu cannot be initialized.
•
“C. M. S.” menu
-“Lightness”, “Chroma” and “Hue” respectively
saved for Custom 1-3 on the “C.M.S.” menu.
•
“Fine Sync” menu
-Resolution
•
“Options 1” menu
-System Lock
•
“Options 2” menu
-Lens Type
•
“Language” menu
•
Image stored using “Image Capture”
•
Lamp Timer (Life)
Selecting the On-screen
Display Language
The projector can switch the on-screen display
language among 16 languages.
Overview of All Menu
Settings and the Lamp Life
This function can be used to display all the ad-
justed settings as a list on the screen and you
can confirm the lamp life.
Helpful Functions Set during Installation (“Options 2”
menu)/Using the Other Menus (“Language” and
“Status” menus)
Menu operation
Page
47
