36
Switching the Input
Mode
Select the appropriate input mode for the con-
nected equipment.
Press
COMPUTER1/2
,
DVI
,
HDMI
,
VIDEO
or
S-VIDEO
on the remote
control to select the input mode.
■
When you select the input mode with
INPUT
P
P
P
P
P
/
R
R
R
R
R
on the projector or
P
P
P
P
P
/
R
R
R
R
R
on
the remote control:
•
When
P
P
P
P
P
/
R
R
R
R
R
is pressed, the Input list ap-
pears. While the Input list is displayed,
follow the procedure below to switch the
input mode.
– Press
P
P
P
P
P
/
R
R
R
R
R
to select the desired input
mode and then press
ENTER
.
•
When “AUTO SEARCH” is selected,
input signal is automatically detected.
•
If
ENTER
is not pressed, the projector
switches to the selected input mode in
a few seconds.
Note
•
When no signal is received, “NO SIGNAL”
will be displayed. When non-supported sig-
nal is received, “NOT REG.” is displayed.
•
The input mode is not displayed when “OSD
Display” of the “Options1” menu is set to
“Level A” or “Level B”. (See page
57
.)
Adjusting the Volume
Press
VOL +/–
on the projector or on
the remote control to adjust the volume.
Note
•
Pressing
VOL–
will lower the volume.
Pressing
VOL+
will raise the volume.
•
When “Pict in Pict” (see page
56
) is set to
“On”, audio volume cannot be adjusted on
the projector. The audio volume buttons will
instead function as location shift button for
the smaller screen.
COMPUTER1/2,
DVI, HDMI, VIDEO
and S-VIDEO buttons
'
/
"
buttons
"
On-screen display
Volume
buttons
Image Projection
Input mode menu
