Eiki 1 122 511 01, Service Manual

Page: 70 / 312

-70-
Optical Adjustment
1
Loosen 2 screws-A of Prism/LCD panel unit.
CAUTION: When loosening the screws-A, do not touch the other mechanical part or give it shock.
2
Fully loosen 2 screws-B on the Adjustment tool.
3
Fully slide the Adjustment tool part-A into the LCD panel bracket hole.
4
Mount Adjustment tool on the LCD panel/prism unit with 2 screws-C attached with Adjustment tool along the guide
on top of prism assy.
CAUTION: Do not use other kind of screws for mounting, otherwise LCD panel/prism unit may be damaged.
5
Tighten screws-B and hold the LCD panel bracket.
Adjustment tool installation
Note; Before mounting the Adjustment tool, set adjustment screws of Adjustment tool in center of the adjustment
range.
Refer to Screw setting.
adjustment
tool
screw-B
Lcd Panel Bracket
Part-a
screw-a
Lcd Panel
Bracket hole
screw-B
screw-c
adjustment tool
Loosen 2 screws-B before installation.
Lcd Panel bracket
Prism/Lcd Panel
unit
tighten 2 screws-B and
hold the Lcd Panel bracket
tighten 2 screws-c and
hold the Prism/Lcd Panel
unit
slide the
adjustment tool.
Insert Adjustment tool leg (2 Legs) into LCD
panel bracket holes, and tighten screws-B and
hold LCD panel bracket with Adjustment tool.
Step 2 Step 3 Step 4
LCD panel/prism unit