7
4.
Preparation (unpacking, etc.)
Remove all packaging materials, check for completeness and damages and report irregularities directly to your
supplier.
Tabel 1 Part list air permeameter (art. no. 0865)
Quantity Description
Art. no.
Remarks
1
Pressure hose 8x13 mm (max. 20 bar) length 10 m, with Euro quick
connect coupling
H104510
1
Plastic transparent bottle 1 litre
990804
1
Sample holder insert 103 mm
H700597
2
Rubber seal (flat) sample holder
H223558
1
Perforated disc 103 mm
H274786
1
Clamp ring sample holder 103 mm
H700598
1
Sample holder 53/60 mm insert
H700617
1
O-ring sample holder insert
H222983
(mounted)
1
Perforated disc 53 mm
H274790
1
Perforated disc 60 mm
H274788
1
Clamp ring sample holder 53/60 mm insert
H700618
1
O-ring sample holder clamp ring insert
H222990
(mounted)
1
Rubber seal (flat) sample holder clamp ring insert Ø 100
H223560
1
Rubber seal (flat) sample holder clamp ring insert Ø 53
H223440
3
Clamp ring nut
H165885
1
Calibration block (hole 0.6 mm) + identification sticker
(coupled with serial)
Use original Eijkelkamp spare parts only!
5. Installation
5.1
Placement of the apparatus
Make sure that you place the apparatus in a clean; dry; vibration free and non direct sunlight surrounding for
best operational performance and measurement results. The apparatus should be well accessible from the
operating front.
Adjust the table surface height and levelness for ergonomic purposes. There are four adjusting screws underneath
the frame.
6.
Checking the apparatus
Before measurements can be performed the instrument calibration and functionality must be checked. For
detailed information see the appendix calibration, maintenance and service.
In case of any doubt about functionality, always contact your supplier.
