4
Install and disassemble the MotorTurbo
Page 8 / 30
4. Install and disassemble the MotorTurbo
4.1 Connect the host
Open the package, please make sure if the product contains all
accessories according to the packing list, and place the host on a
stable surface.
Connect the Compressed air and water connector to the handpiece
four-hole connector of dental unit, and tighten the nut.
Connect the power adapter to the power connector, and connect the
power cable to power adapter, then connect the power cable plug
into a power source that meets the requirements (refer to
11.Technical Specifications).
4.2 Installation and removal of motor
Motor installation: align the motor tail wire nut with the motor, and
then tighten the motor tail wire nut.
Motor
Motor tail wire nut
Motor removal: Unscrew and separate the motor tail line nut, and
gently disassemble the motor.
Compressed air and
water connector
Motor tail wire
Power
connector
Power
switch
