Eight CENTURY CC1, Manual

Page: 9 / 14

ADVANCED
SETTINGS
DISPLAY READOUT
EXPLANATION
The language of the Profiler Revolution can be set to English,
Italian, Spanish or French.
Tap REGION to check to which region/country the Profiler
Revolution is set. To change the region/country, a hard reset is
required (see instructions above (cfr. REGION/COUNTRY SETTINGS).
Define DC VOLTAGE for the inputs, choose between 12V or 24V.
This is a global setting for all inputs, each input can then be
switched between OFF or this value.
(cfr. STEP 2). All countries are set by default on 24V, except UK
which is set by default on 12V.
Tap FW VERSION to check the firmware version of the device.Tap
SERIAL NUMBER to check the serial number of the device. To format
the SD CARD, tap FORMAT CARD.
SD CARD
SETTINGS
DISPLAY READOUT
EXPLANATION
To upload settings from a SD card, tap LOAD SD PRESET. This will
copy the configuration file from the SD CARD to the device.
To save the device settings on the SD CARD, go to SAVE SD PRESET
and tap on CREATE PRESET.
It is possible to create multiple presets. Therefore, tap CREATE
PRESET after each modification of the settings.
To delete all presets, press DELETE ALL.
P.9
The filter bandwidth can be changed from -2000 kHz to 0 kHZ in
steps of 250 kHz.
This allows you to optimize the bandwidth of your filter.
For instance, a European 8 MHz channel can be changed from 6 to
8 MHz. The default setting is -1000 kHz, which is an optimal setting
in 95% of the cases.