background image

EiconCard P92 Installation Guide    27

Limited Warranty

Eicon Technology Corporation warrants to the original purchaser of this Eicon Technology 
Product that it is to be in good working order for a period of five (5) years from the 
date of purchase from Eicon Technology or an authorized Eicon Technology dealer. 
Should this Product, in Eicon Technology’s opinion, fail to be in good working order 
at any time during this five year warranty period, Eicon Technology will, at its option, 
repair or replace this Product at no additional charge except as set forth below. Repair 
parts and replacement Products will be furnished on an exchange basis and will be 
either reconditioned or new. All replaced parts and Products become property of 
Eicon Technology. This Limited Warranty does not include service to repair damage 
to the Product resulting from accident, disaster, misuse, abuse, or non-authorized 
alterations, modifications, and/or repairs.

Products requiring Limited Warranty service during the warranty period should be 
delivered to Eicon Technology with proof of purchase. If the delivery is by mail, you 
agree to insure the Product or assume the risk of loss or damage in transit. You also 
agree to prepay shipping charges to Eicon Technology and to use the original 
shipping container or equivalent.

EICON TECHNOLOGY HEREBY DISCLAIMS ALL OTHER EXPRESSED 
AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING, BUT NOT 
LIMITED TO, THE WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow the exclusion of 
implied warranties, so the above limitations may not apply to you.

IN NO EVENT WILL EICON TECHNOLOGY BE LIABLE IN ANY WAY TO 
THE USER FOR DAMAGES, INCLUDING ANY LOST PROFITS, LOST 
SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES 
ARISING OUT OF THE USE OF, OR INABILITY TO USE, SUCH PRODUCT. 
Some jurisdictions do not allow the exclusion or limitation of incidental or 
consequential damages for consumer products, so the above limitations or exclusions 
may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 
ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM ONE 
JURISDICTION TO ANOTHER.

This Limited Warranty applies to hardware products only.

203086-1.FM5  Page 27  Friday, February 28, 1997  10:35 AM

Summary of Contents for EiconCard P92

































Reviews: