Page 10 of 21
Operation manual Swiftcam x
BA-E-Swiftcam X-neutral-2005.doc
Rev 2.0
COLOUR ADJUST
Red
Adjusting this slider will adjust the RED portion of the image
Blue
Adjusting this slider will adjust the BLUE portion of the image
Saturation
Use this slider to adjust the colour saturation of the image
Quit
Returns to the main menu
WINDOW SETTINGS
Window Steps
Specifies the number of available windows
Window Start
Specifies the size of the starting Window
Quit
Returns to the main menu
EXPERT SETTINGS
This menu is destined only for advanced users. It contains special features, which are normally not necessary for
normal use of the camera.
Brightness
This slider can be used to change the average brightness level of the camera. Changing this
level will affect all other settings, which have an influence on the brightness. You should use
this slider only when correct exposure is not achieved using the WINDOW feature.
AGC
This slider is used to set the AGC amplification. Take note, that maximum amplification
results in maximum noise on the monitor picture.
ATM
This will enable the electronic anti-moiré filter.
Quit
Returns to the main menu.
FACTORY SETTINGS
This option resets the camera to the factory settings.
CAUTION:
There is no sub-menu available. Using this option will immediately reset the camera and
discard all changes you have made.
QUIT
This option quits the menu
