2
INSTALLATION GUIDE
HAICO TELGTE II EQUINE OPERATING TABLE
T +49 7461 96 580 0 | F +49 7461 96 580 90 | [email protected] | www.eickemeyer.com
Installations of the new table ….. about one hour work as follows:
Installing the Table
Before you start working with the surgery table make the following installation works.
1. Install the fuse to its place (located in the rear end of the table).
Tools: a small screwdriver (3 to 5 mm wide)
2. Install the head part of the table to its place.
Tools: 6 mm allen key, 13 mm spanner, two 17 mm spanners
3. Install the charger on the wall.
Tools: 10 mm drill (type depends on the wall material), cross type screwdriver
4. Install the equipment stand on the wall.
Tools: 10 mm drill (type depends on the wall material),10 mm spanner, srewdriver (5 to 10 mm wide)
5. Charge the battery before start using the table.
Installing the Fuse
Installing the Head Support
Hasp screws to be installed
Screw installation direction
The screws
