2. For the IPA that has already been turbid, let the waste
settle after standing for about 10 hours, and then slowly
pour the upper layer of alcohol into other clean
containers, which can increase the times of IPA use.
Maintenance
1. After using, please drain the internal IPA or any liquid
to avoid long-term soaking inside of the
device
. In
addition, cover the IPA tank to avoid volatilization.
2. Please double check whether there are resin debris or
other sundries in the bottom of the sink or in the filter
tank before each time using the unit. The dirt must be
cleaned out before it can be used.
3. If the
device
is dirty inside after a period of use, you
can clean the device with clean water. please enter and
drain water multiple times (turning off the cleaning,
air-drying and curing functions) to achieve the purpose
of flushing the device.
Troubleshooting
1.the model turns white after curing
①The IPA is too turbid, or the IPA concentration is not
enough, it is recommended to replace the IPA with a
concentration of more than 95% as the cleaning
solution.
② The model is too complicated or placed in a poor
-7-
