EIBENSTOCK EDS 125, Original Instructions Manual, Page: 15 / 64

15
Technical Data
Wet-Dry Diamond Saw EDS 125
Rated voltage: 230 V ~ 110 V ~
Power input: 1250 W
Rated current 11,4 A
Order Number: 0660V
Frequency: 50 - 60 Hz
No-load speed: 12.000 rpm
Max. disc diameter: 125 mm / 5”
Spindle connection: Ø 22.2 mm / 7/8”
Cutting depth max.: 36 mm / 1 3/8” (without guide rail)
Protection class: II
Degree of protection: IP 20
Net weight: ca. 2,8 kg / 6,4 Ibs.
Interference suppression: EN 55014 and EN 61000
Available accessories:
Item Order No.
Diamond cutting disc 125 mm 3744B
Groove cutting disc 125x6 mm 37446
Diamond curve disc 115mm 3744A
Guide rail 750 mm 37461
Guide rail 1500 mm 37462
Set of 2 suction holder for guide rail 37464
Cutting table ETT 700 09801
Cutting table ETT 1200 09802
Broadening of the support surface for ETT 09803
Industrial Vacuum Cleaner DSS 25 A 09915
Content of Delivery
EDS 125 with diamond cutting disc Ø 125mm, tool kit and operating
instructions in a case.
Application for Indented Purpose
The Wet-Dry Diamond Saw is intended for professional use and may only be
operated after being fully installed in accordance with the installation
instructions.
With the appropriate diamond cutting disc, the EDS 125 can be used to cut
tiles, ceramics and natural stone as well as for joint renovation by wet and
dry cutting.
During wet cutting, the diamond cutting disc must be cooled with water from
the available water supply. During dry cutting, vacuum removal of the dust is
absolutely essential.
Only diamond cutting discs recommended by the manufacturer should
be used.