EI Ei1020 Installation Manual Download Page 3

3

1.  Obstructions of any sort will result in a reduction in range from the free 

space specification. The range may vary depending on installation.

2.  Temperature and humidity conditions are for normal operation and 

storage. Units will function outside these ranges as required by the specific 

product Standards. Extended exposure to conditions outside these ranges 

can reduce product life. For advice on prolonged operation outside these 

ranges consult the manufacturer.

Technical Specification

Power supply

3V Lithium Battery (non-replaceable)

RF frequency

868.2MHz band (1% duty cycle)

RF Range

>100 Metres in free air

1

Receiver category

2

Typical RF power

8.1 dBm

Max RF power

+14 dBm

Data upload

Via the Ei1000G Gateway

Fixings

Supplied with screws, wall plugs and 
mounting bracket

Operating 
& Storage 
Temperature range

-10°C to 40°C

Operating & 
Storage Humidity 
range

15% to 95% Relative Humidity

2

 

(non-condensing)

Dimensions

70mm x 70mm x 34mm

Weight

Ei1020: 74g    Ei1025: 81g

Approvals

RF performance to EN 300 220-1 in 
accordance with EN 300 220-2
EMC performance to EN 301 489-1 in 
accordance with EN 301 489-3
Safety to EN 62368-1

Summary of Contents for Ei1020









Reviews: