5
Additional RadioLINK Alarms can be added to the system at any time. Simply put
all
the Alarms into the House Code mode at the same time and again check the number
of blue light flashes on each Alarm.
RadioLINK Troubleshooting
It is imperative that all Alarms in your system communicate with each other. The
number of walls, ceilings and metal objects in the signal path reduces the strength of
the RadioLINK signals between the Alarms. Accordingly, one or more Smoke / Heat
Alarms may have difficulties in communicating to all the other Alarms in the system.
If, when checking the RadioLINK interconnection, some of the Alarms do not
respond to the button test, then you will need to either:
(i) Position another RadioLINK Alarm to act as a ‘repeater’ (see Interconnection with
RadioLINK Modules below) between the units which are not communicating and so
EXTEND ANTENNA
VERTICALLY
CUT OUT NOTCHES
ON ALARM &
MOUNTING PLATE
EXTEND ANTENNA
HORIZONTALLY
Figure 3
B16971-R0-Ei600 RF-U&C 28/6/10 12:13 PM Page 5
