Ei Electronics Ei 105B User Instructions Download Page 12

disconnected) and send it to “Customer Assistance and
Information” at the nearest address given on the Smoke Alarm
or in this leaflet. State the nature of the fault, where the Smoke
Alarm was purchased and the date of purchase.

Five Year  Product  Guarantee 

(excluding battery)

Ei Electronics guarantees this product (excluding battery)
against any defects that are due to faulty material or
workmanship for a five year period after the original date of
consumer purchase or receipt as a gift. This guarantee does
not include damage to the product resulting from accident or
misuse. It also excludes incidental and consequential
damages. If the product should become defective within the
warranty period, we will replace it free of charge. (see “Getting
Your Smoke Alarm Serviced”) 

Do not interfere with the product or attempt to tamper with it.
This will invalidate the guarantee.

IMPORTANT NOTICE

DUST & INSECT CONTAMINATION

All Smoke Alarms and particularly the optical
(photoelectric) type are prone to dust and insect ingress
which can cause false alarms.

The latest design, materials and manufacturing
techniques have been used in the construction of our
Alarms to minimize the effects of contamination.
However it is impossible to completely eliminate the
effect of dust and insect contamination, and therefore, to
prolong the life of the Smoke Alarm you must ensure that
it is kept clean so that excess dust does not build up. Any
insects or cobwebs in the vicinity of the Smoke Alarm
should be promptly removed.

In certain circumstances even with regular cleaning,
contamination can build up in the smoke sensing
chamber causing the alarm to sound. If this happens the
alarm must be returned to us for servicing or
replacement. Contamination is beyond our control, it is
totally unpredictable and is considered normal wear and
tear. For this reason, contamination is not covered by the
guarantee and a charge is made for all servicing work.

If you experience persistent false alarms, in particular
locations, due to contamination of the smoke chamber
you  could   consider fitting our ionisation type Smoke
Alarm. The principle of ionisation detection makes it less
vulnerable to the effects of dust or insect contamination.

13

B10274-R4-105B-U&C-ENG  30/9/09  8:23 AM  Page 12

Summary of Contents for Ei 105B















Reviews: