O2- Kompmaster
Page 9
All rights reserved. May not be photocopied or stored on a retrieval system without the prior written permission of EHS.
Only for use in conjunction with an Aerotronic control unit. © EHS- Engineering 2003
For more information, see
http://www.komposttechnik.de
Figure 8: Fuse Holder
7 Setting the Address
In order for the PC software to separately acquire and archive the data of each control
unit, each control unit must have an individual address that is different to those of the
“Kompmaster” devices. The micro switch block for setting the address is located on the
PCB.
Figure 9: Position of the Micro Switches
The address range is from 1 to 32. Usually the addresses are already set correctly on
delivery of the control units. If you want to change the addresses or replace an old
