Connections
Mains & DMX
6
Connections
Mains & DMX
The eventCON® system is an innovative VDE certified connection System for
professional use. It offers one connection for Power supply as well as the
DMX signal. You will only be in need for one cable. You are able to loop
through to the next device, while the BabyBeam 4 offers you an input and
output.
The connection of the Power supply has to be done by qualified personnel
only. Do not connect the BabyBeam 4 if you are not able to survey the
consequences.
Do not try to connect another Type of Plug than an original eventCON®. Do
not use any force to connect the eventCON® plug. You could use the outlet
for connecting additional devices. The internal Power wiring is done with a
cable cross section of 2.5mm².
The eventCON® System offers a big range of optional cables and mergers.
For further information see Chapter eventCON® on Appendix page
IV
output
input
