Connections
Mains & DMX
6
Connections
Mains & DMX
The eventCON® system is an innovative VDE certified connection System for professional use. It offers one connection for Power
supply as well as the DMX signal. You will only be in need for one cable. You are able to loop through to the next device, while the
BabyBeam 4 offers you an input and output.
The connection of the Power supply has to be done by qualified personnel only. Do not connect the BabyBeam 4 if you are not able
to survey the consequences.
Do not try to connect another Type
of Plug than an original eventCON®. Do not
use any force to connect the eventCON® plug. You could use the outlet for connecting additional devices. The internal Power wiring
is done with a cable cross section of 2.5mm².
The eventCON® System offers a big range of optional cables and mergers. For further information see Chapter eventCON® on
Appendix page
output
input
