Activate the parameter by pressing Tare button.
Then use the TEST key to select a desired value between 01 -
28 (corresponds to channel 01 - 28).
Confirm and close the parameter by pressing the ZERO key.
The display alternately shows P13 and xx, where xx
corresponds to the newly set channel number.
Press the TEST key until P14 appears in the display.
Parameter P14 is used to set the scale number.
Press the TARE key to activate the parameter.
Then use the TEST key to select a desired value between 01 -
16 (corresponds to channel 01 - 16).
Confirm and close the parameter by pressing the ZERO key.
The display shows P14 and xx alternately, where xx
corresponds to the new scale number set.
Press the TEST key repeatedly until P99 appears in the
display.
Parameter P99 is used to store the changed values
