ehb SMARTdisplay 101
Operating Instructions
©
ehb Errors excepted
Vers. 1.2
5
/
19
1.3 Important Notes for the Use
How to use
The device must only be operated with the supplies provided.
Use a mild cleaning agent to clean the device.
Do not insert any objects that are not designed for the specific purpose into the
openings of the unit, as this may cause problems in the electrical components.
When operating the device, always observe general accident prevention regula-
tions.
Safety
Do not operate the
ehb SMARTdisplay 101
device within range of strong electro-
magnetic fields. Observe the temperature specifications listed in Chapter 6.
Storage
ehb SMARTdisplay 101
devices that are not being used must be stored as de-
scribed in the operating specifications.
Shipping
When shipping, equipment must always be shipped in the original packaging or in
correspondingly sturdy packaging.
Use of unsuitable packaging constitutes negligence, hence rendering null and
void any claim to repairs under warranty.
Maintenance
The
ehb SMARTdisplay 101
requires no maintenance throughout its entire ser-
vice life and requires no special care.
Installation
During the installation of the device follow the directions of the manufacturers of
plugs and wire harnesses.
Opening the
device
The
ehb SMARTdisplay 101
contains any parts that can be serviced, replaced or
repaired by customers or third-party maintenance personnel.
The
ehb SMARTdisplay 101
is sealed to protect against any unauthorised open-
ing. Please note that unauthorised opening will destroy the device.
CAUTION
Do not use high-pressure cleaning equipment to clean the device.
Service personnel are to be fully instructed that high-pressure cleaners will
damage the device and void the warranty
.
Display and
Touch Screen
The touch screen may only be operated using fingers or special stylus with tip
width of at least 2mm (e.g. stylus for PDA).
There is no warranty in case of
improper operation (e.g. use of knife or screw driver on touch screen).
A broken display is under no circumstances covered by warranty.
The small hole on the back of the housing below the connector cover is
not
used
for a hardware reset!
Please
do not
insert any object into this hole! Otherwise an important membrane
could be destroyed and water might soak into the housing of the device!
Damages of the device due to a broken membrane are not covered by
warranty.
