08
The GHOST gimbal is made from lightweight aluminum alloy and is used to carry a
camera.
CAMERA OPERATION
INSTALLATION
GIMBAL
Supports exFAT 32k formatted cards.
70 minutes @ 1080P when fully charged.
Note:Quickly press the power button to change modes.
Press the Confirm button to start and stop recording.
(When charging, do not use a charger that delivers more than 1000mA
or the camera may be damaged.)
Micro SD Card
Recording Time
Power On/Off
Charging
Connect a USB cable to charge the camera.
Press the power button to turn on. To turn off, hold the power
button until “GOODBYE” appears.
SPECIFICATIONS
127g
±0.09°
7 V – 17 V
Roll ±45°/ Pitch -90°to +30°
EHang Sports Camera, GoPro3, GoPro 3+, GoPro4
Weight
Accuracy
Operating Voltage
Angle Restrictions
Supported Cameras
Gimbal (with Clamp)
Clamp the camera into the gimbal holder, and then tighten the long screws to hold
the camera in place.
The camera lens should be on the right side of the clamp when installed correctly.
Completion
1
Installing the camera.
Summary of Contents for GHOST
Page 1: ...OPERATING MANUAL www ehang com ...
Page 30: ...www ehang com EHang Inc 2015 ...
