EGT EGT-300, User Manual

Page: 9 / 20

9
• Installation Overview
Counter Top Type
Connect Water Lines
※ For the first time use, please press and hold dispenser and flush 2 liter water over.
Hot
Adater valve Adater valve
Sink
Cold
Inlet water tubing
Middle valve for
inlet water
① Insert the inlet water tubing to water inlet collar located on the rear of the unit.
② Connect the another end of tubing to the water filter inlet of the adaptor value.
③ Turn on the middle valve for inlet water.
④ Turn on the water supply valve.
You are now ready to turn the water main back on.
As the system fills, check for leaks and make sure that everything is connected properly.
Run the water to flush the system for about 5 minutes.
You any notice some carbon dust in the water initially.
This is normal and harmless. After flushing the system you should be able to check for clarity
of the water in a clear glass.
•
•
Feed water supply tube
Feed water supply valve
Close Open