background image

56 VOLT LITHIUM-ION CORDLESS MOWER — LM1700E/LM1700E-SP

12

EN

 

If the equipment should start to vibrate abnormally, 
stop the motor and check immediately for the cause. 
Vibration is generally a warning of trouble.

 

Inspect for damage;

 

Replace or repair any user replaceable damaged 
parts;

 

Check for and tighten any loose parts.

 

Never operate the mower without the proper trailing 
shield, discharge cover, grass bag, mulching insert, 
side discharge chute, motor/blade control handle 
or other safety protective devices in place and 
working. Never operate the mower with damaged 
safety devices. Failure to do so can result in 
personal injury.

 

If situations occur that are not covered in this manual, 
use care and good judgment. Contact EGO Customer 
Service for assistance.

 

Use only with the battery packs and chargers listed 
in fig.A

 

The battery pack must be removed from the appliance 
before it is scrapped.

 

The battery shall be disposed of safely.

OPERATION ON A SLOPE:

Slopes are a major factor related to slip-and-fall 
accidents, which can result in severe injury. Always 
be sure of your footing on slopes. Operation on slopes 
requires extra caution. If you feel uneasy on a slope, do 
not mow it.

Do:

 

Mow across the face of slopes; never mow up and down. 
Exercise extreme caution when changing direction on slopes.

 

Watch for holes, ruts, rocks, hidden objects, or bumps which 
can cause you to slip or trip. Tall grass can hide obstacles.

Do not:

 

Do not mow near drop-offs, ditches or embankments; you 
could lose your footing or balance.

 

Do not mow slopes greater than 15 degrees.

 

Do not mow on wet grass. Unstable footing could cause 
slipping.

SERVICE

 WARNING:

 Grass bag components, the discharge 

cover, side discharge chute, mulching insert and trailing 
shield are subject to wear and damage, which could expose 
moving parts or allow objects to be thrown and could 
increase the risk of injury. For safety protection, frequently 
check all components and replace damaged components 
immediately with identical replacement parts, listed in this 
manual. Contact EGO Customer Service or your closest 
EGO service center, and repairs or replacements shall be 
performed by a qualified service technician!

 

If the mower’s built-in overload protection switch 
frequently trips, contact EGO Customer Service or your 
closest EGO service center.

 

Do not wash the mower with a hose; avoid getting 
water in the motor and electrical connections.

 

Remove the key and store the idle lawn mower indoors 
when not in use. Allow the motor to cool before storing it 
in any enclosure. The lawn mower should be stored in a 
dry, high, or locked-up enclosure, out of reach of children.

 

When servicing, use only identical replacement parts 
listed in this manual. Use of parts that do not meet the 
original equipment specifications may lead to improper 
performance and compromised safety.

 

Remove or disconnect the battery pack before servicing, 
cleaning, or removing material from the lawn mower.

 

Follow instructions for changing accessories.

 

Keep handles dry, clean and free from oil and grease.

 

To reduce a fire hazard, keep the motor cover free of 
grass, leaves and debris build-up.

 

Check the blade and motor mounting bolts at frequent 
intervals for proper tightness. Also, visually inspect the 
blade for damage (e.g., bending, cracking and wear.). 
Replace the blade only with the identical replacement 
blade, listed in this manual.

 

Maintain your mower with care – keep the mower 
blade sharp and clean for the best and safest 
performance. Mower blades are sharp and can cut. 
Wrap the blade or wear gloves and use extra caution 
when servicing it.

 

Never remove or tamper with safety devices. Regularly 
check their proper operation. Never do anything to 
interfere with the intended function of a safety device 
or to reduce the protection provided by a safety device.

 

Always stop the motor before making adjustments to a 
wheel or a cutting-height adjustment.

 

After striking a foreign object, stop the motor, remove the 
key, and thoroughly inspect the mower for any damage. 
Repair the damage before operating the mower.

Summary of Contents for LM1700E-SP




















Reviews: