background image

56 VOLT LITHIUM-ION CORDLESS MOWER — LM1700E/LM1700E-SP

11

EN

OPERATION 

GENERAL OPERATION:

 

Read this operator’s manual carefully in its entirety before 
attempting to assemble this machine. Read, understand, 
and follow all instructions on the machine and in the 
manuals before operation. Be completely familiar with the 
controls and proper use of this machine before operating 
it. Keep this manual in a safe place for future and regular 
reference and for ordering replacement parts.

 

Use the right appliance – Do not use the lawn mower 
for any job except that for which it is intended.

 

Don’t overreach – Keep proper footing and balance at 
all times.

 

Objects struck by the lawn mower blade can cause severe 
injuries to persons. The lawn should always be carefully 
examined and cleared of all objects prior to each mowing.

 

Before and while moving backwards, look behind and 
down for small children and other people.

 

This machine is not a plaything. Therefore, exercise 
extreme caution at all times. Your unit has been 
designed to perform one job: to mow grass. Do not use 
it for any other purpose.

 

Don’t force the lawn mower – it will do the job better 
and more safely at the rate for which it was designed.

 

Before using, always visually inspect to see that the 
blades, blade bolts and cutter assembly are not worn or 
damaged. Replace worn or damaged blades and bolts 
and any other components at the same time to preserve 
balance. Replace damaged or unreadable labels.

 

Use extreme caution when reversing or pulling the 
appliance towards you.

 

Thoroughly inspect the area where the equipment is to 
be used. Remove all stones, sticks, wire, toys and other 
foreign objects that could be tripped over or picked up 
and thrown by the blade. Thrown objects can cause 
serious personal injury. Plan your mowing pattern to avoid 
discharge of material toward roads, sidewalks, bystanders 
and the like. Also, avoid discharging material against walls 
or obstructions, which may cause discharged material to 
ricochet back toward the operator.

 

To help avoid blade contact or an injury from thrown 
objects, stay in the operator zone behind the handles 
and keep children, bystanders, helpers and pets at 
least 30m from the mower while it is in operation. Stop 
the machine if anyone enters the area.

 

Always wear safety glasses or safety goggles during 
operation and while performing an adjustment or repair 
to protect your eyes. Thrown objects that ricochet can 
cause serious injury to the eyes. Always use a face or 
dust mask if the operation is dusty.

 

Dress properly – Do not wear loose clothing or jewelry. 
They can be caught in moving parts. Use of rubber 
gloves and footwear is recommended when working 
outdoors. Wear sturdy, rough-soled work shoes and 
close-fitting trousers and shirts. Shirts and trousers 
that cover the arms and legs and steel-toed shoes are 
recommended. Never operate this machine in bare feet, 
sandals, slippery or lightweight (e.g., canvas) shoes.

 

Do not put hands or feet near rotating parts or under 
the cutting deck. Contact with the blade can injure 
hands and feet.

 

A missing or damaged discharge cover can cause 
blade contact or injuries from thrown objects.

 

Many injuries occur as a result of the mower being 
pulled over the foot during a fall caused by slipping or 
tripping. Do not hold onto the mower if you are falling, 
release the handle immediately.

 

Never pull the mower back toward you while you are 
walking. If you must back the mower away from a 
wall or obstruction first look down and behind to avoid 
tripping and then following these steps: 

 

Step back from mower to fully extend your arms.

 

Be sure you are well balanced with sure footing.

 

Pull the mower back slowly, no more than half way 
toward you.

 

Repeat these steps as needed.

 

Do not operate the mower while under the influence of 
alcohol or drugs.

 

Stay alert – watch what you are doing. Use common sense. 
Do not operate the lawn mower when you are tired.

 

The motor/blade control handle is a safety device. 
Never attempt to bypass its operation. Doing so 
makes the safety device inoperative and may result 
in personal injury through contact with the rotating 
blade. The motor/blade control handle must operate 
easily in both directions and automatically return to the 
disengaged position when released.

 

Avoid dangerous environments – Don’t use lawn 
mowers in damp or wet locations.

 

Don’t use in rain.

 

Always be sure of your footing. A slip and fall can 
cause serious personal injury. If you feel you are losing 
your footing, release the motor/blade control handle 
immediately and the blade will stop rotating within 
three seconds.

 

Stop the blade when crossing gravel drives, walks or 
roads.

Summary of Contents for LM1700E-SP




















Reviews: