56V litHium-iOn COrDleSS BlOWer — lB4800
56V litHium-iOn COrDleSS BlOWer — lB4800
5
4
fcc statement
1. this device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
this device may not cause harmful interference.
this device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTICE:
this equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. these limits are
designed to provide reasonable protection against harmful interference in a residential
installation. this equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. if this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures: reorient or relocate the receiving antenna. increase
the separation between the equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/tV technician for help.
safety Guidelines
SaFETy SyMBOLS
the purpose of safety symbols is to attract your attention to possible dangers. the
safety symbols and the explanations with them deserve your careful attention and
understanding. the symbol warnings do not, by themselves, eliminate any danger. the
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Be sure to read and understand all safety instructions in this
Operator’s manual, including all safety alert symbols such as “
DANGER
,” “
WARNING
,”
and “
CAUTION
” before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
DaMagE pREVENTION aND INFORMaTION MESSagES
these inform the user of important information and/or instructions that could lead
to equipment or other property damage if they are not followed. each message is
preceded by the word “nOtiCe”, as in the example below:
NOTICE:
equipment and/or property damage may result if these instructions are not
followed.
WARNING:
the operation of any power tools can result in foreign objects being
thrown into your eyes, which can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses with
side shields and a full face shield when needed. We recommend a
Wide Vision Safety mask for use over eyeglasses or standard safety
glasses with side shields. always use eye protection which is marked
to comply with anSi Z87.1.
