background image

56 VOLT LITHIUM-ION CORDLESS MOWER — LM1700E

12

EN

ATTACHING THE GRASS BAG

 WARNING: 

Do not at any time make any 

adjustment to the lawn mower without first stopping 

the motor, removing the safety key and waiting for the 

blade to stop rotating.

NOTICE:

 Attach any of the attachments to the lawn 

mower before mowing.

 

To Attach/Remove the Grass Bag (Fig. G1 & G2)

Insert the board of the grass bag into the mower and 

hang the grass bag on the mower.

NOTICE:

 Remove the pre-installed mulching insert 

from the mower before attaching the grass bag to the 

mower.

 

To Attach/Remove the Mulching Insert (Fig. H)

Lift the rear-discharge door and insert the mulching 

insert into the mower. To remove, just pull it out. Lastly, 

release the rear-discharge door.

ADJUSTING THE CUTTING HEIGHT (Fig. F)

 WARNING:

 Keep your feet away from the deck 

when adjusting its height. The mower can be set to 7 

cutting heights between 20mm and 80mm. Choose 

the proper cutting height according to the types and 

conditions of the grass.

NOTICE:

 When moving the tool, make sure the cutting 

height is adjusted at the position of 3 or higher. Failure 

to do so, could result in the damage of the blade.

ATTACHING/DETACHING THE BATTERY PACK (Fig. I)

CHARGE BEFORE FIRST USE.

 WARNING: 

If any parts are broken or missing, do 

not attempt to attach the battery pack to the mower or 
operate the mower until the broken or missing parts are 
replaced. Failure to do so could result in serious injury. 

 

To Attach

Push the battery pack into the battery compartment until 
you hear a “click”. 

 

To Detach

Depress the battery-release button in the battery 
compartment.

Fig. I parts description see below:

I-1

Safety Key

I-2

Safety Key Slot

I-3

Battery-release Button

NOTICE:

 Make sure that the latch on the mower snaps 

into place and that the battery pack is secured to the 
mower before starting operation.

STARTING/STOPPING THE MOWER

 WARNING:

 The operation of any lawn mower 

can result in foreign objects being thrown into your or 
other’s eyes, which can damage eyes severely. Always 
wear safety glasses while operating the mower, or while 
performing any adjustments or repairs on it.

 WARNING:

 Do not use the mower in the rain.

 WARNING:

 Ensure that other people and pets 

remain at least 30m away from the mower when it is in 
use.

 WARNING:

 The blade will continue to rotate for 

a few seconds after the mower is turned off. Allow the 
motor/blade to stop rotating before starting it again. Do 
not rapidly turn the mower off and on.

SAFETY KEY

In order to prevent accidental start-up or unauthorized 
use of your cordless mower, a removable safety key has 
been incorporated into the design of your mower. The 
mower will be completely disabled when the safety key 
has been removed from the mower.

DANGER:

 Rotating blades can cause serious injury. 

To prevent serious injury, remove the safety key when 
the mower is unattended, or when adjusting, cleaning, 
servicing, transporting, lifting, or storing the mower.

NOTICE:

 The motor cannot be started unless:

 

The handle is locked into one of the three operating 
positions, see ADJUSTING THE FOLDABLE HANDLE.

 

The side rails are fully extended (Fig. J)

 

Both green handle-locking clamps are securely closed 
(Fig. K).

CAUTION:

 Do not attempt to override the operation of 

the safety button and bail switch.

NOTICE:

 There are two starting models.

Summary of Contents for LM1700E

















Reviews: