2.7 Accessing the Web Interface
egnite Querx features an integrated web server. Only a
web browser is required to configure the device and
access tracked data.
The data gathered by the device is visualized in a graph
on the home page. JavaScript is required for the graph
to be displayed correctly. It is, however, not required for
the configuration process.
Boot a web browser on your PC and enter the IP address
of your Querx into the address bar, if you know it.
Alternatively, Querx is accessible via its system name, if
your PC supports Multicast DNS (mDNS or LLMNR).
Enter the following web address into your browser’s
address bar: http://<systemname>.local/
The default system name is querx000000. The six zeros
are placeholders for the six last digits of the device’s
MAC address. The MAC address is printed on the sticker
on the back of the device.
19
Access via system
name
Access via IP address
