ATTACHING THE FAN BLADES
7
INSTALLATING THE MOUNTING PLATE
Step 1.
Remove the 1 of 3 screws from the mounting
ring and loosen the other 2 screws. (Do not remove)
Step 2.
Place the key holes on the mounting plate
over the 2 screws previously loosened from the
mounting ring, turn mounting plate until it locks in
place at the narrow section of the key holes. Secure
by tightening the 2 screws previously loosened and
the one previously removed. (Fig. 14)
Step 1.
Attach the blade to the blade bracket using
the screws and fiber washers as shown in Figure 13.
Start screw into bracket. Repeat for the remaining
screws.
Step 2.
Tighten each screw. Make sure the blade is
straight.
Fig. 13
Fig. 14
Screws
Fiber
washers
Blade
Blades bracket
Screws
Mounting ring
Mounting
plate
