29
/
46
Engine break-in
This is the most important period in the life of your ATV. because the engine is brand new, you can’t put an excessive load and over speed on it for
the first several hours or within 500km running. During this time, the various parts in the engine wear and polish themselves to the correct
operating clearances. During this period, never full throttle operation.
After engine break-in, change the engine oil also oil filter and so on involved parts, check and adjust the valve clearance, free play of the clutch.
Periodic maintenance and adjustment
Periodic inspection, adjustment and lubrication will keep your machine in the safest and most efficient condition possible. Safety is an obligation of
the machine owner. The most important points of machine inspection, adjustment and lubrication are described on below pages.
INITIAL
EVERY
ITEM
ROUTINE
320km
1200km
2400km
2400km
4800km
valves
Check valves
Adjust it if necessary
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Cooling system
Check for leakage
Repair if necessary
Replace coolant yearly
√
√
√
√ √
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Spark plug
Check condition, Check the gap and clean
Replace if necessary
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Air filter element
Clean
Replace if necessary
Clean every 300km-500km, more often in wet or dust areas
Carburetor
Check choke operation
Adjust the idle speed
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Exhaust system
Check for leakage, Tighten if necessary
Replace the gasket if necessary
√
√
√
√ √
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Fuel pipe
Check the fuel hose for crack or damaged
Replace if necessary
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√