EGig Smart Switch eG8G, Quick Installation Manual, Page: 10 / 29

8
Log-in Screen
Once a direct connection to the serial port is established, the log-in screen for the onboard
configuration program appears as shown below.
If this is your first time to log into the configuration program, then the default password is
“admin.” This password gives Read/Write access to all configuration parameters and statistics.
You should define a new password, record it and put it in a safe place. Select System Configuration
from the Main Menu and enter a new password for the administrator. Note that passwords can
consist of up to 15 alphanumeric characters and are not case sensitive.
You are allowed three attempts to enter the correct password; on the third failed attempt the current
connection is terminated.
Smart Switch
User Interface
v1.04 (c) Copyright 2002 Mototech Inc.
Password :