Before You Unpack
It is very important that you first carefully inspect all shipping cartons for
damage. EgglestonWorks loudspeakers are packed extremely well, and any
damage encountered during shipping should be limited to the packaging. When
purchasing through a dealer who is also doing your set-up, damage to the speakers
is not usually a problem. However, if a shipping company is involved in the
delivery of the speakers to your house, there is always the potential for damage to
occur. It is very important to contact your dealer or the shipping company
immediately. Damage claims must be filed with most shipping companies within a
few days of delivery.
EgglestonWorks recommends that you save all packing materials. The
speakers are very heavy and due to their unique design, these cartons are the safest
way to transport them if needed.
UnCrating Instructions
1)
The door of the crates will be marked but is the angled side of the crate. You
will find several screws on this door circled or other wise marked with an
arrow. Remove these screws and set them aside.
2)
Once the door is removed, set it aside. The speakers are placed in the crates
front first to protect the drivers, especially the tweeters. With the doors
removed, you will be looking at the back of the speakers.
3)
Attached to the outside of the crates is a ramp that will help with removing
the speakers from the inside of the crate. You do not have to use the ramp,
but you will likely find it helpful. The ramp is attached by a few screws that
are marked. Remove these screws and place the ramp in front of one of the
crates.
4)
Your Ivy Signature’s are equipped with specialized roll-and-set
caster/coupling devices. The two rear casters are in the locked position
during shipping and will need to be unlocked by turning the orange sprocket
until the black collar is fully raised.
