STEP 2: ADD TO ALARM SYSTEM
You are now about to register the motion detector with your Egardia alarm system.
1.
Remove the plastic battery tab at the back of the motion detector to activate the battery.
Ensure the tab has been completely removed! Wait till the status indicator of the motion
detector stops flashing. This will take approximately 30 seconds.
2.
Ensure at your gateway that the alarm is turned off. The top indicator light (Status) and the
bottom indicator light (Online) are lit green.
3.
Press the "Reset" button at the side of the gateway for at least 7 seconds. The top indicator
light (Status) of your gateway flashes green to indicate it is searching for new accessories.
4.
Press the register button of the motion detector. The gateway beeps once to indicate the
motion detector is successfully registered. The gateway beeps twice to indicate the motion
detector has already been successfully registered.
5.
Press again the "Reset" button at the side of the gateway for at least 7 seconds if no more
accessories are being added. The gateway returns to normal operation.
6.
Login to your Egardia account and go to the tab "Alarm system". The registered motion
detector will appear after a few minutes.
7.
Rename the motion detector for easy recognition.
STEP 3: MOUNT MOTION DETECTOR
Place the motion detector in a room where the chance of burglary is high. Before mounting use the
key fob to test the desired mounting place is within range of the gateway.
Important guidelines
●
The sensor functions optimally at places with a high chance of a burglar moving across its
detection zone and not directly towards it,
e.g. in the corner of a room
.
●
The optimal height of the motion detector is
1,90
metres.
●
The optimal height of the motion detector in a narrow corridor is
1,70
metres.
●
Avoid
placing the motion detector in the following locations:
o
Behind objects that could restrict the detection zone, e.g. furniture or curtains.
o
Directed at doors that are secured by a door/window sensor.
o
In direct sunlight or close to heat sources such as log-fires, boilers or steam or
above radiators.
o
Behind or directed at windows or moving objects such as curtains.
Pets
The motion detectors are pet friendly. They are designed not to react to pets weighing up to 38 kg
and not taller than 1,0 m. Placing the detector at a height of 2,30 m results in a free movement zone
of approximately 7,0 m (see diagram). Placing the detector higher will increase the free movement
zone even further.
Determine the height carefully to ensure that also larger pets are not detected. Above a height of 1,0
m the motion detector will not react to a weight up to 18 kg.
2
Summary of Contents for MOV-31
Page 1: ......