1
INSTALLATION GUIDE BELL BOX
Congratulations on the purchase of your Egardia bell box.
Customer Service
Please visit
www.egardia.com
if you would like further information about the installation and use of
Egardia. The answers to a number of frequently asked questions can be found at
www.egardia.com/userquestions.
This package has been put together with care. Please contact our customer service if you would like
any help during installation or if something is missing from the package. Never return a package
without prior instruction from our customer service.
Bell box
The bell box with a maximum siren output of 104 dB will be activated during an alarm. The bell box
works wirelessly and is powered by factory installed batteries. There is no need for a connection to
a power supply and the installation is extremely easy.
Please note!
In some municipalities it is not allowed to sound a siren outside. Please check with
your local authorities. Set DIP switch number 5 to "OFF" to deactivate the siren.
Sound and light signals for each type of alarm
Sound signal
Light signal
Duration
Burglar alarm
Continuous
Continuous
Depends on the
Panic alarm
Continuous
Continuous
settings of DIP
Fire alarm
Beeps of 2 sec.
The 3 LED indicators
flash
switches number 3
and 4
Flood alarm
Beeps of 2 sec.
The 3 LED indicators
flash
OVERVIEW BELL BOX
1.
Battery switch
–
To turn the bell box on or off.
2.
DIP switches
–
To adjust the settings of the bell box.
3.
Tamper switch
–
The alarm is triggered when this switch is activated.
4.
Mounting holes (4x)
–
To mount the bell box using screws.
5.
Safety screw
–
Prevents the opening of the bell box.
Tampering
The bell box is secured with a tamper switch. Removing the bell box from the wall or removing the
cover of the bell box will trigger an alarm. Temporarily deactivate the tamper switch while mounting
the bell box to the exterior wall.
Confirmation sounds
The bell box can be set to beep to confirm the alarm system has been turned on or off. Also the bell
box can be set to beep during the delay period. These confirmation sounds are deactivated by
default. You may activate these sounds in your Egardia account.
1.
Login to your Egardia account and click on the tab "Alarm system".
2.
Click under heading "Accessories" on "Change settings".
3.
Then click "Set bell box" and choose the preferred settings.
4.
Click "Confirm" to save the settings.
For more information read the appendices:
Appendix A
–
Audible and light signals bell box
Appendix B
–
DIP switches bell box
Website Egardia
www.egardia.com