17
The regular control of the compressed air filter, as well as the regular checking of the machine
with regards to external damages.
Inspection and maintenance can be done by the operator. Disassembly and re-assembly of the
machine have to be executed by qualified staff only. Incorrect assembly can lead to danger of
accident for the operator and to defects on the machine.
After completing maintenance and repair work and before restarting production make sure that...
• All materials, tools and other equipment which are required for maintenance or repairs have
been removed from the work area of the machine.
• Any fluid leaks have been removed.
• All safety devices on the machine have proper function.
• The oil level was checked, if necessary.
• Fixtures of screw connections are tight.
• Removed container covers, screens or filters were reinstalled
The owner ensures that all maintenance, inspection and assembly work is done by authorized and
qualified experts, who have been appropriately informed by thorough study of the operation manual.
Disassembly- Re-assembly
Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively the
sectional drawings (see repair instruction). All work regarding disassembly and re-assembly, as well as
maintenance and repair have to be executed by the manufacturer or skilled staff only.
DANGER
– Working with the machine without appropriate preparation and
disregarding of instructions. Shut down the machine properly and let it cool down to the ambient
temperature.
NOTICE
– Special instructions apply for the repair of explosion-proof machines.
Retrofits or modifications of the machine can affect the explosion protection. Therefore, retrofits or
modifications are allowed upon agreement with the manufacturer only.
The explosion-proof machine is designed in the type of protection “c“ constructive safety. All
work executed on the machine, influencing the explosion protection, e. g. repairs with mechanical
machining, require an approval of an authorized expert or have to be done by the manufacturer. The
internal structure must remain unmodified.
The manufacturer is available for all maintenance, repair and assembly work, as well as for
damages.
STORAGE
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature fluctuations as
well as mechanical damage. Always store the machine in a way that important machine instructions,
e. g. on stickers and signs, are legible.
