4
BATTERY INSTALLATION
1.
Remove the two screws on the battery cover with the Phillips #1 drive
screwdriver.
2.
Install three AAA batteries as per the polarity icons on the battery compartment.
3.
Replace the battery cover and screws.
Warning!
- Substitution of Components May Impair Intrinsic Safety.
- Use only Durcell MN2400 LR03, Energizer E92 LR03, Philips, PN LR 03 (Powerlife) or
Panasonic, PN LR03 (Xtreme Power) AAA size alkaline Batteries.
- To reduce the risk of explosion, do not mix old batteries with new batteries, or mix batteries
from different manufacturers.
- To reduce the risk of explosion, batteries must only be changed in an area known to be non-
hazardous.
CARACTERÍSTICAS TÉCNICAS
ATEX Zone
0, 1, 2 GAS / 20, 21, 22 DUST
Ambient temperature Ta
-20ºC - +50ºC
Light source
1W Led
Power supply
3 x AAA batteries (type tested)
Protection rating
IP65
Weight
120g
Length
71mm
Ex designation
I M1 Ex ia I Ma, II 1 G Ex ia IIC T4 Ga, II 1D Ex ia IIIC T65ºC Da IP65
Batteries incluided
Yes
ENGLISH
