4
SAFETY INSTRUCTIONS
Attention! Be careful.
1. Do not wear loose clothing. They could be caught by moving parts of the machine.
2. For outdoor work, rubber gloves must be worn.
3. Before starting up the machine, check that the electric cable and switch are in optimum
condition.
4. Before carrying out any maintenance work or change of accesories, disconnect the machine
from the mains.
5. Always use the machine´s indicicated accesories because if you don´t, it could lead to risk of
personal injury.
MAINTENANCE
Always carry out any job on the machine with the machine disconnected.
1.
Pipe Fastener Support
: Check that the teeth of the jaws are in optimum condition; if not, replace
them.
2.
Gear Box
: Maintenance is not required because it has special grease which is good for life.
3.
Brushes
: Clean them and check the condition of the slack, changing the brushes when the slack
reaches 2/3 of the total.
4.
On switch
: Check that the machine switch unblocks automatically when finger pressure is
released, stopping the motor rotation.
Note
: For any necessary repairs, contact with our Technical Services.
TECHNICAL CHARACTERISTICS
Threading capacity
1/4 ÷ 2
Motor
1350 W (230 V / 50-60 Hz) or (110 V / 50-60 Hz)
Thread speed
28 rpm
Reverse speed
50 rpm
Weight
8 Kgs.
WORKING INSTRUCTIONS
1.
Use maker’s threading heads, light series and heavy series.
2.
Always use the support; fastening it correctly to avoid the machine from rotating around the pipe
(especially when threading the biggest sizes).
ENGLISH
