7
Technical specifications
Accuracy
3%
Calibration certificate
Reversible
Teeth
45
Individual case
62951-62979
MAINTENANCE AND INSPECTION
- Set the torque to the lowest setting following use to relieve stress on the compressive spring.
- Only clean the unit using dry materials – do not dip it in petrol or solvent.
- Do not disassemble the wrench for any reason.
- With the exception of the ratchet mechanism, do not lubricate the wrench.
CALIBRATION
The wrench should be re-calibrated periodically. The calibration of the wrench should be
checked at least once a year, after any abnormal use or overloading, or after 5.000 cycles.
NOTES
IMPORTANT!
The maker will not take responsibility for damage or malfunction as a result of the tool being
incorrectly used or, applied for a purpose for which it was not intended.
GUARANTEE
The maker guarantees to the machine owner garantie ilimitee against any manifacture defect.
This guaranteee do not cover the parts wich are consumables.
Note: to apply the guarantee its necesary to send the “GUARANTEE CERTIFICATE” duly filled
within one week after purchased the machine to the maker.
