EFX MK-VI Audio Controller Owner’s Manual
14
4.1.3 BPM/Volume
This menu allows assigning the BPM and two volume values. The BPM can be set to use the global BPM or preset
specific BPM.
BPM
Global : The BPM works with global BPM when the current preset is recalled.
40 - 209 : The BPM works with current value in this menu when the current preset is recalled.
Volume.A and Volume B
ˀG
Increase/Decrease each volume value (min:-48.5dB max:+15.0dB, 0.5dB steps).
ˍ
Each volume controller can be bypassed like other audio loops. The IA switch (Vol.A/B) must be turned
on when using the volume controller.
4.1.4 Loop Order
This menu allows changing loop order and signal routing you can make the following settings.
ˍ
Change the connection order of effect loops
ˍG
Create a split connection
ˍG
Specify Carry Over
Symbol
Description
Symbol
Description
Input
Input Buffer
Loop 1 and Loop2
Loop 3 ~ Loop 12 (mono-send/return)
Volume-controller A and B
Two Outputs
(Left/Right)
Loop 12
(mono-send/stereo-return)
There are several limitations below to change the signal routing :
ˍ
The IInput and O
Output cannot be moved.
ˍ
The IInput Buffer and L
Loop 1, 2 can only be repositioned with each other.
ˍ
If the signal is split from the previous, the signal cannot be split again after that.
ˍ
When you set up a specific loop as the carry-over function, the volume-controller(vA or vB) must be at the
next position. When a specific loop is set to the carry-over function with the volume-controller, the line in
between is displayed with a C
Cross symbol.
