EFM Synthesizers EFM Mad Mouse Pro, Assembly And Setup Manual, Page: 5 / 27

R132
Switches
S1
Switch - Mini Toggle on/off
SPST
Mouser 10TC220 1 $1.70 $1.70
S3, S4
Switch - Mini Toggle on/on
DPDT
Mouser 10TC260 2 $2.58 $5.16
S5, S6
Switch - Mini Toggle on/on
SPDT
Mouser 10TC230 2 $1.88 $3.76
S2 Switch 4X Dip 4X DIP RA Mouser 571-4358023 1 $1.79 $1.79
Transistors
Q15, Q19, Q24, Q28,
Q29
Transistor - 2N3819 N Fet (J112) Mouser 610-2N3819 5 $0.55 $2.70
Q1, Q13, Q18, Q21,
Q22, Q27, Q31, Q32,
Q33, Q34
Transistor - 2N3906 GP NPN Mouser 625-2N3906 10 $0.10 $1.00
Q2, Q3, Q4, Q5, Q6,
Q7, Q8, Q9, Q10,
Q11, Q14, Q16, Q17,
Q2O, Q23, Q25, Q26,
Q30
Transistor - 2N3904 GP PNP Mouser 625-2N3904 18 $0.10 $1.80
Q12 Transistor - 2N5460 P Fet Mouser 610-2N5460 1 $0.36 $0.36
Trimmers
T1, T2, T3, T4, T5,
T6, T7 Trimmer - Multiturn Cermet
50K
Mouser 72-T93YA-50K 7 $1.20 $8.40
Initial Assembly
If you want to install a power jack extra holes will need to be drilled in the
large power-pads. Drill a hole on each side of the current hole in the
direction of the jack terminals and use a sharp pointed x-acto knife to cut out
the space between the holes.