Efka DC 1550, Instruction Manual

Page: 50 / 52

Instruction Manual
- 50 -
8.1.2 Keys on the multiple-function key bar on the machine head
Upon pressing one of the keys S1...S8, its number appears in the display. On the V810/820/850 also in## and on.
Display example for input S7 on the V820/V850 control panel:

8.1.3 Outputs of control

Select the desired output using the +/- keys.

On the V810 control panel or on the built-in keypad in the control, the >> key is used to turn on the
associated output, if it is connected and working.

On the V820 control panel, instead of the >> key the key (lower right, at the outer edge) must be pressed.
Display example for backtacking output on the V820/V850 control panel:

Output on socket
Backtacking ST2/34
Sewing foot lifting ST2/35
M1 ST2/37
M2 ST2/28
M3 ST2/27
M4 ST2/36
M5 ST2/32
M6 ST2/30
M7 ST2/21
M8 ST2/24
M9 ST2/25
Outputs M10 ST2/29
Outputs M11 ST2/31
8.1.4 LEDs of the multiple-function key bar on the machine head
The procedure is exactly as described in the previous section.
If the
>> or F2 key is pressed, the associated LED lights up.
Display example for LED 01 on the V820/V850 control panel:

LED in/over key
01 in S1 (thread monitor)
02 in S1 (oil sensor)
03 above S2
04 above S3
05 above S4
06 above S5
07 above S6
08 above S7
09 above S8
10 in S2
11 in S3
12 in S4
13 in S5
14 in S6
15 in S7
in S7 on
2-34 oUt vr
LED 01